Hello, I’m

Enes Mercan

Spacecraft Electronics Design Engineer

I design the electronics that keep satellites powered and pointed the right way.

  • 6 spacecraft in orbit
  • 3+ years in the space industry
  • Designed Power unitMagnetometerIMUADHU

02Mission briefing

Three years. Six spacecraft. From the first schematic to the first signal from orbit.

  • 6 Spacecraft in orbit carrying hardware I helped design, build and test
  • 7 Spacecraft built avionics for 4 microsatellites, 1 CubeSat and 2 SpaceTugs
  • 4 Spacecraft units designed power, magnetometer, IMU and analog data handling
  • 3+ Years in the space industry from concept to launch and early orbit operations

What I design

Flight hardware, explained simply

  • Power unit PCDU

    The satellite’s power plant. It takes energy from the solar panels and battery and delivers it safely to every system on board.

  • Magnetometer unit

    A compass for orbit. It measures Earth’s magnetic field so the satellite knows which way it is facing.

  • Inertial unit IMU

    Senses every turn and wobble, so the satellite can hold steady and point where it needs to.

  • Analog data unit ADHU

    Reads very faint sensor signals with ultra-low noise. My design improved how accurately the satellite knows its orientation.

Concept to orbit

I owned the whole journey

  1. 01RequirementsResearch, trade studies and specs
  2. 02DesignSchematics, PCB layout and simulation
  3. 03BuildManufacturing and bring-up
  4. 04Test & qualifyThermal vacuum, vibration, EMI/EMC, radiation
  5. 05IntegrateSpacecraft-level integration
  6. 06LaunchSix spacecraft launched
  7. 07OperateOn-orbit power monitoring

Missions in orbit

Tap a patch to find it in the time machine

Awards

Student space competitions

  • 3rdNASA Satellite Design Competition2023
  • 2ndLatin American Space Challenge2023
  • 4thNational Satellite Design Challenge2022
  • 7thNational Rocket Design Competition2023

03Linear vertical time machine

The Time Machine

Scroll down to travel back through my career, from today to the day it all began in 2018.

  1. Two more spacecraft reach orbit

    • FGN-100-D4Navigation satellite · 150 kg
    • FGN-TUG-S02Orbital transfer vehicle · 560 kg

    The fourth navigation satellite and the second, larger SpaceTug carry hardware I worked on at Fergani Space.

  2. The constellation grows

    • FGN-100-D3Navigation satellite · 100 kg

    The third navigation satellite joins the first two in orbit.

  3. My first hardware reaches orbit

    • FGN-100-D1Navigation satellite · 104 kg
    • FGN-100-D2Navigation satellite · 101 kg
    • FGN-TUG-S01Orbital transfer vehicle · 250 kg

    The first two navigation satellites and the first SpaceTug launch. In the critical first days in orbit, the Launch and Early Orbit Phase, I monitored their power systems and helped troubleshoot from the ground.

  4. Graduate studies in electronics

    MSc coursework · Istanbul University

    Alongside full-time spacecraft work: analog integrated circuit design, noise analysis in electronic circuits, digital MOS integrated circuit design and motor drive systems.

  5. Electrical & Electronics Engineer

    Fergani Space Technologies

    I designed the electronics that power satellites and help them find their orientation, then followed that hardware through testing, launch and its first days in orbit.

    • Built the avionics for 4 microsatellites, 1 CubeSat and 2 SpaceTugs
    • Designed the power unit (PCDU), magnetometer unit, ADHU and IMU
    • Tested hardware in thermal vacuum and vibration, at unit and spacecraft level
    Engineer’s details
    • Owned the full electronic product lifecycle: literature research and trade studies, requirements, schematic and PCB design, manufacturing, electrical and functional testing, environmental qualification and system-level spacecraft integration.
    • Qualified hardware for TVAC, vibration, EMI/EMC, single-event effects (SEE) and total ionising dose (TID).
    • Developed Software-in-the-Loop (SIL) and Hardware-in-the-Loop (HIL) test benches for spacecraft electrical and functional validation.
    • Ran power, thermal and TVAC tests on the spacecraft PCDU under mission-representative conditions.
    • Improved attitude-determination accuracy with ultra-low-noise, low-drift precision analog circuits for the ADHU.
    • Took part in LEOP: on-orbit power-system performance monitoring and troubleshooting.
    • Prepared FMEA for the electronic equipment with the systems engineers, supporting system-level risk assessment.
    • PCDU
    • ADHU
    • IMU
    • Magnetometer
    • TVAC
    • Vibration
    • EMI/EMC
    • SEE · TID
    • SIL · HIL
    • FMEA
    • Altium Designer
    • LTspice
  6. Engineer Intern

    Fergani Space Technologies

    My first steps in the space industry: a 220 W power converter for a satellite, and load tests on its power distribution unit.

    Engineer’s details
    • Designed a 220 W synchronous DC-DC buck-boost converter for the satellite.
    • Ran electrical load tests on the satellite’s Power Conditioning and Distribution Unit and documented the results.
    • Verified the thermal performance of the PCDU boards with lab instruments.
    • Designed 100 W isolated DC-DC converter schematics for COTS converters.
  7. Graduation, and a strong competition season

    BSc Electrical & Electronics Engineering · Karadeniz Technical University

    • 3rdNASA Satellite Design Competition
    • 2ndLatin American Space Challenge
    • 7thNational Rocket Design Competition
  8. Electronics Design Engineer (Scholar)

    TÜBİTAK BİLGEM

    Designed a high-speed data interface board that links two avionics units on a national fighter jet program.

    Engineer’s details
    • Designed a high-speed data interface board connecting the IFF and OBC avionics units.
    • Troubleshot and fixed issues on FPGA-based military electronic boards.
    • Rebuilt and standardised the Altium Designer hardware library for reuse across the R&D department.
    • Produced harness and interconnection documentation for system-level integration and testing.
    • Prepared technical reports and project documentation to program requirements.
  9. Hardware Design Engineer

    DOF Robotics

    While finishing my degree, I designed and built custom control hardware for industrial robots, from idea to product.

    Engineer’s details
    • Designed and manufactured robotic control hardware for industrial use.
    • Delivered idea-to-product hardware solutions and engineering consultancy to the R&D team.
    • Designed everything in Altium and simulated it in LTspice before manufacturing.
    • Wrote the technical documentation and user manuals for the hardware.
  10. Electrical & Electronics Engineering Intern

    ASSAN Elektronik İmalat

    Designed precision circuits that read very weak signals, and a test board that checks products coming off the production line.

    Engineer’s details
    • Designed low-noise, precision analog instrumentation to acquire weak external signals.
    • Designed a stable, low temperature-drift constant-current generator for LED drive tests.
    • Designed a hardware-in-the-loop simulator board that verifies products in mass production.
  11. Electrical & Electronics Engineering Intern

    Digitest Defence & Aerospace

    Designed an 840 W three-phase motor driver built to military standards.

    Engineer’s details
    • Designed military-grade 3-phase 840 W motor driver hardware.
    • Studied and implemented MIL-STD-1275.
    • IGBT conduction and switching loss calculations, bootstrap circuit design, thermal management and protection techniques.
    • Supported the team with prototyping and soldering electronic boards.
  12. 4th place, National Satellite Design Challenge

  13. Team lead, KTU Space Club

    Led the design of two sounding rockets and four satellite projects. This is where my path to space really began.

  14. Electrical & Electronics Engineering begins

    BSc · Karadeniz Technical University

    Power electronic circuits, electromagnetic compatibility, industrial electronics and motor drives, plus an 8-month cultural exchange program in the United States.

Every mission starts on the ground.

Trabzon, Türkiye · 2018

04Next mission

Building the next spacecraft? Let’s talk.

I’m always glad to talk about spacecraft electronics, ambitious missions and the teams that build them.